TDR 100
Maximum power, the highest compressive strengths and a high degree of mobility simply don't go together? Then you haven't encountered our TDR 100. We would be pleased to change that. Either here on this web page or in a direct conversation.
With 300 or 400 kW cutting power, it cuts at compressive strengths of up to 140* MPa. The cutting arm's feed is 600mm long. Additional accessories enable a wide range of uses.
Product information
* The ADVANTEC TDR 100 is an electrically powered track-mounted roadheader machine that has been designed for cutting hard and abrasive rock masses with an axial compression strength (UCS) of up to 140 MPa, and in extreme cases even up to 180 MPa for tunnelling applications.
Product information
| Technical data | TDR 100 |
|---|---|
| Weight | 100 t |
| cutting power | 300-400 kW |
| total power | 482-582 kW |
| cutting height | 2,500 - 5,600 / 6,100 mm |
| Cutting width | 4,200 - 8,500 / 9,000 mm |
| Machine length | 13,250 mm |
| Machine width loading table min. | 4,000 mm |
| Machine height | 2,020 mm |
| cutting cross section | 48 / 55 m² |
| Cuttable rock strength | 140 Mpa |
| Cutting arm feed | 600 mm |
| Width of caterpillar track | 700 mm |
| ground pressure | 18 N/cm² |
| undercut | 320 / 360 mm |
| gradeability | 20 gon |
* The ADVANTEC TDR 100 is an electrically powered track-mounted roadheader machine that has been designed for cutting hard and abrasive rock masses with an axial compression strength (UCS) of up to 140 MPa, and in extreme cases even up to 180 MPa for tunnelling applications.
